@janathorpe0332
Profile
Registered: 2 years, 10 months ago
Introduction to Panic Alarms
Goal
The aim of a panic alarm is to allow an individual under duress to quickly and silently call for assist in the event of an emergency. Panic alarms are additionally called "duress alarms", "hold-up alarms", or "panic buttons".
Panic alarms are used when it may be unsafe or uncomfortable to call for assist in different ways. For example, if a belligerent individual is standing in your foyer, it may be unwise to additional escalate the situation by picking up a phone to call for assistance. A panic alarm can provide a quick and handy way to summon assist without drawing attention.
Silva Consultants feels that just about every business can benefit from the use of panic alarms. Locations where panic alarms may be particularly helpful include:
Receptionist's desks in building lobbies.
Security stations and checkpoints.
Shipping/receiving areas.
Customer support counters.
Check-out counters and cashier's stations.
Rooms where money or different valuables are obtained, processed, or stored.
Interview rooms in Human Resources department.
Executive office suites.
Locations where confrontations with the general public are likely to occur.
Elements of a Panic Alarm System
Panic alarms encompass two primary parts:
Panic Button
The panic button is the system that the individual activates when he or she wants help. There are many styles of panic buttons available. These can have a single pushbutton, two pushbuttons that must be pressed concurrently, units that have to be squeezed, and units which are activated by a foot or knee. There are additionally devices that may be covertly activated when money or a product is removed at the request of a robber. Most panic buttons are specifically designed to resist accidental activation.
Panic buttons are normally put in in a location where they can simply be reached, but out of view of the informal observer. In many cases, panic buttons are put in on the underside of a desk or counter-top.
Panic buttons could be the wired type or wireless type. Wired panic buttons are related using cabling. Wired panic buttons are very reliable, but it can sometimes be difficult and costly to get cable to every panic button location.
Wireless panic buttons use a brief-range radio transmitter, just like that used with a garage door opener. Wireless panic buttons are simple to put in and can be placed just about anywhere. Wireless panic buttons may also be carried round on the premises by staff if desired. Wireless panic buttons require batteries and need to be tested incessantly to guarantee that they are operating properly.
Communications System
The communications system is the strategy that's used to summon assist when a panic button is pressed. The type of communications system used depends largely on the resources available at the facility where the panic alarm is being put in and the level of security threat.
Types of communications systems used can include:
Communications to an off-site alarm monitoring heart:
This methodology would typically be used at facilities that would not have an on-site security employees, reminiscent of at a small business. The panic buttons would be related to an alarm control panel which sends a signal to the monitoring center when a panic button is pressed. The alarm monitoring heart would then call the police or different appropriate people to answer the site.
Communications to security control center:
Most giant companies have some type of centralized security monitoring and control middle, either on-site, or at a central location somewhere within their organization. When this type of resource exists, panic buttons are typically monitored on the control center. Most frequently, panic buttons are related to the group's access control and security management system, which transmits the alarm to the control center.
When a panic button is pressed, it sounds an alarm in the security control center. The middle would then dispatch native security officers and/or the police to respond to the site.
Communications to non-security personnel:
Some organizations that shouldn't have on-site security select to notify non-security personnel when a panic button is pressed. Often, the organization will type a "response team" consisting of workers from multiple departments (Facilities, HR, etc.) and ask that these staff respond when a panic button is pressed.
There are various systems that can be used to notify the response workforce when a panic button has been pressed. These embody can include overhead paging systems and gadgets that send voice messages, textual content messages, or e mail messages directly to smartphones.
If you beloved this report and you would like to obtain additional data relating to Importance of workplace panic buttons kindly check out our site.
Website: https://www.earlkmiller.org/the-importance-of-workplace-panic-button/
Forums
Topics Started: 0
Replies Created: 0
Forum Role: Participant